The current world
scenario has drastically changed due to covid-19. People have found ways to
accommodate the basic needs all by themselves. The increase in technology has
helped people a lot in times of trouble. There are different gadgets available
in every home to ease out the family and their lifestyle. The internet is one
of them and has become an essential part of our lives. Our everyday routine
depends and revolves around the internet. The working of the internet depends
on the installation process to get going. It means that a basic understanding
of hardware and software is required. You can install your Spectrum internet at
home. Through this blog, we will help you with the installation of your
internet with simple and easy steps all by yourself.
During the current
times, it is better that you install your internet on your own for safety
sakes. While installing the internet, you will get to know a lot of things.
This way, you can save the installation charges as well. You have to patient
enough as it is a lengthy process, and will acquire a lot of knowledge. The
problems after setting would require self-handling but, there will be a proper
manual with the self-installation kit so, don’t worry. You have to study that
and follow the simple steps.
Installation method
Now we will help you
with setting up your internet connection. Before starting, make sure all the
components and elements to start the process are available to set up your
Spectrum Internet. Below is the list of required things:
- Instruction Guide
- Modem
- Wi-Fi Router
- 2 Power Cables
- Coaxial Cable
- Multiple Ethernet Cable
If you have the
following components, you are good to go and can start the self-installation
process.
Installation Steps
The first thing is to
figure out a cable outlet. Now attach one end of the coaxial cable in the cable
outlet and the other end in the modem. Power up the modem by plugging it into
the power socket. When the light on the modem starts blinking wait, for few
minutes to get them stable. If the modem lights are stable, it means that your
modem has internet access.
In the second step,
place your Wi-Fi router where there is no disruption in the house, according to
you. The modem and Wi-Fi router will be connected through the Ethernet cable
so, it should be near the modem to get easily connected through the wire. Turn
on the router to start the signal distribution, plugging the router with the
power cable in the source. Now, wait for few minutes for the internet
connection to get stabilize. Once you see a constant green light, it means that
the internet is ready for use.
The final step is to
connect your devices to the internet through the Wi-Fi router. The initial
credentials to activate the internet are printed on the back of the router.
Connecting to a desktop may need another Ethernet cable if there is no Wi-Fi
card installed, but linking mobiles and laptops is very easy through the Wi-Fi
router. Once you have access to the internet, you can change your password and
username accordingly.
Once you are down with
the setting up process, activate your Spectrum internet. Open the browser after
connecting the device and an activation page of Spectrum Internet will be
redirected. If you are not directed to this page automatically, you can use the
link for “spectrum.net/selfinstall” to open the spectrum internet activation
page.
Now enjoy your
favorite seasons or browse as much as you want through the best Internet
service provider. Though the installation process is quite simple, if there are
still some problems with the self-installation, you can contact spectrum
customer services representative. The technicians will again guide through the
steps on call.
No comments:
Post a Comment